Ricoh 2035e Benutzerhandbuch

Reception Features

104

You can have messages sent from
Specified Senders printed on paper
from the bypass tray. This is useful if
you need messages printed on a size
of paper not stocked in the paper
tray(s).
You can load a maximum of 100
sheets of standard paper in the by-
pass tray.

r Before you can use this function,

you need to turn on Authorized
Reception (Initial Setup Reception
Mode settings), program the Spec-
ified Senders (Key Operator Set-
tings) along with the paper. See
p.144 “Reception Settings”. See
p.163 “Special Senders to Treat
Differently”.

r The print area is determined by the

optional expansion memory, reso-
lution, and the vertical length of
the originals. 

r If paper longer than 600 mm

(23.62") is used, the paper may get
wrinkled, it may not be sent, or a
paper jam may occur.

r The machine can detect A4L,

A3L(8

1

/

2

"

×

11"L, 11"

×

13"L) pa-

per sizes. When you load any other
size, specify the paper size. See
p.170 “Programming Bypass Tray
Paper Size” .

r When using tray 1 of the optional

1000-sheet finisher, paper is out-
put to the tray even with non-
standard sizes selected.

r If the specified paper size and the

size of paper set in the bypass tray
do not match, paper jams may oc-
cur, or the image may be truncat-
ed. 

r If messages are printed on paper

smaller than A4, the image may be
truncated, or split across sheets.

r If you use this function, Image Ro-

tation and 180-Degree Rotating
Printing are not possible.