Ricoh 2035e Benutzerhandbuch

9

This section gives instructions for connecting the machine and computer, config-
uring the machine, and installing software.

™ When operating the machine with a parallel connection, USB connection, or SCSI

• Connect the machine and computer using a parallel cable, a USB cable, or

an IEEE 1394 (SCSI print) cable.

For more information, see p.10 “Connecting the Machine”.

• Install a printer driver from the CD-ROM.

For more information, see p.15 “Installing the Software”.

™ When operating the machine under a network environment

• Configure the network using the machine's control panel.

For more information, see "Network Configuration", Network Guide.

• Install a printer driver and other utilities from the CD-ROM.

For more information, see p.15 “Installing the Software”.

ˆ "Network environment" describes a situation where the machine is connected

to a computer via Ethernet, wireless LAN, or IEEE 1394 (IP over 1394).

ˆ The optional IEEE 1394 board for SCSI print connection and the optional USB

2.0 board for USB connection cannot be both installed in the machine.