Ricoh 2035e Benutzerhandbuch

Preparing to Print

28

-Bidirectional transmission

When bidirectional transmission is
enabled, information such as paper
size and feed orientation is automati-
cally sent to the computer. You can
also check machine status from your
computer.
• Bidirectional transmission is sup-

ported under Windows 95/98/Me,
Windows 2000/XP, and Windows
NT 4.0.

• When bidirectional transmission is

running, machine status and infor-
mation can be viewed by opening
the printer driver screen.

To support bidirectional transmis-
sion, the following conditions are re-
quired:

™ When connecting with a parallel cable

• The computer must support bi-

directional transmission.

• The machine must be set to bidi-

rectional transmission.

• The machine parallel port and

computer parallel port must be
connected using a parallel inter-
face cable that supports bidirec-
tional transmission.

ˆ In Windows 95/98/Me, 

 must be selected in 

 on the 

 tab in

RPCS™ printer driver.

ˆ In Windows 2000/XP, or Win-

dows NT 4.0, 

 must be selected, and

 must not

be selected on the 

 tab in

RPCS™ printer driver.

™ When connecting with the network

• The machine must be set to bidi-

rectional transmission.

• SmartNetMonitor for Client in-

cluded on the CD-ROM must be
installed.

One of the following conditions
must also be satisfied as well as the
two requirements mentioned
above:
• The port for SmartNetMonitor

and TCP/IP must be used.

• The standard TCP/IP port is

used without changing the port
name (Windows 2000/XP).

• The IP address specified in the

Microsoft TCP/IP Print is used
(Windows NT 4.0).

• The IP address is included in

port name, if using IPP proto-
col.

ˆ In Windows 95/98/Me, 

 must be selected in 

 on the 

 tab in

RPCS™ printer driver.

ˆ In Windows 2000/XP, or Win-

dows NT 4.0, 

 must be selected, and

 must not

be selected on the 

 tab in

RPCS™ printer driver.