Ricoh 2035e Benutzerhandbuch

System Settings (Parallel Connection)

65

Interface Settings/Parallel Interface

™ Parallel Timing

Specifies the timing for the parallel
interface. Normally, you do not
need to change this setting.
• ACK  inside
• ACK  outside
• STB  down

ˆ Default: ACK outside

™ Parallel Communication Speed

Specifies the communication
speed of the parallel interface. If
the speed is too high, data may not
be transferred smoothly. If this
happens, change the setting to
“Standard”.
• High speed
• Standard

ˆ Default: High speed

™ Selection Signal Status

Specifies the signal level of the par-
allel interface.
• High
• Low

ˆ Default: High

™ Input Prime

Specifies whether the prime signal
is active or inactive when an input
prime signal is sent. Normally, you
do not need to change this setting.
• Effective
• Invalid

ˆ Default: Invalid

™ Bidirectional Communication

Specifies, for instance, how a print-
er connected to the parallel inter-
face responds to a status request. If
you experience problems using an-
other manufacturer’s printer, set
this to OFF.

ˆ If set to OFF, asynchronous

communication will not work.

• ON
• OFF

ˆ Default: ON

™ Signal Control

Specifies how to handle any errors
that occur when printing from a
computer or sending faxes. Nor-
mally, you do not need to change
this setting.
• Job acceptance priority
• Printer  priority
• Facsimile priority

ˆ Default: Job acceptance priority