Ricoh 2035e Benutzerhandbuch
Initial Scanner Setup
19
2
v Change Initial Mode
If you use the settings which are
displayed when modes are cleared,
reset, or immediately after the op-
eration switch is turned on as the
initial mode, select
displayed when modes are cleared,
reset, or immediately after the op-
eration switch is turned on as the
initial mode, select
[
Standard
]
.
Select
[
Program No.10
]
when you
use the settings stored in Program
No.10 as the initial mode.
No.10 as the initial mode.
Selecting a custom size
When selecting
[
Custom size
]
as the
scan size, follow the procedure be-
low.
low.
A
Press
[
Custom size
]
on the Scan
Size Setting screen.
B
Enter the original size with the
number keys.
Select and enter values for
number keys.
Select and enter values for
[
X1
]
and
[
Y1
]
, and then press the {#} key.
C
Enter the scan starting point in re-
lation to the standard scan start-
ing point.
Select and enter values for
lation to the standard scan start-
ing point.
Select and enter values for
[
X2
]
and
[
Y2
]
, and then press the {#} key.
D
Enter the scan size (area) with the
number keys.
Select and enter values for
number keys.
Select and enter values for
[
X3
]
and
[
Y3
]
, and then press the {#} key.
Depending on how the original is
positioned, the scan area will be as
follows:
positioned, the scan area will be as
follows:
shows the face of the original.
shows the back of the original.
shows the feeding direction.
The range of possible original sizes
and scan sizes is as follows:
• Original Size
and scan sizes is as follows:
• Original Size
X1: 140 - 432 mm (5.5” - 17.0”)
Y1: 140 - 297 mm (5.5” - 11.7”)
Y1: 140 - 297 mm (5.5” - 11.7”)
X3
X2
X1
Y2
Y1
Y3
When placed on the e
xposure glass
X3
X2
X1
Y2
Y1
Y3
X3
X2
X1
Y2
Y1
Y3
When placed in the ADF
ZHSY055N
X1
X3
X2
X1
Y2
Y1
Y3
Y2
Y3
X3 X2
X1
Y1
Y1
Y2
Y3
X3
X2
Original orientation
Original orientation