Ricoh 2035e Benutzerhandbuch

35

This chapter explains the procedure for placing originals on the exposure glass
and in the ADF, and setting the original scan area and orientation according to
the placement method.
To correctly display the top/bottom orientation of the scanned original on a cli-
ent computer, the placement of the original and the settings made on the control
panel and scanner driver must match.

There are two orientations for placing the original. See the table below.

r Normally, an original is   or  , but in the table below, a square original is

used to make original orientation easy to understand. If the actual shape of
the original is different, the combination of original orientation and the orien-
tation specified on the control panel or scanner driver does not change.

v Specifying original orientation and setting originals

An original to be scanned

Decide the placement method.

Exposure glass

ADF

Place the original.

(There are two original orien-
tations.)

Place the 
original so 
that the top 
edge touches 
the top left of 
the expo-
sure glass.

Place the 
original so 
that the top 
edge touches 
the rear of 
the exposure 
glass.

Place the top 
edge of the 
original first.

Place the 
original so 
that the top 
edge touches 
the back of 
the ADF.

Org.eps