Ricoh fax1170l Benutzerhandbuch
M
AINTENANCE
7.6
4
Wipe the roller surface with a soft cloth dampened with water.
5
Carefully wipe the scanning glass with a soft dry cloth.
If the glass is very dirty, first wipe it with a slightly
dampened cloth, and then with a dry cloth. Be very careful
not to scratch the glass surface.
dampened cloth, and then with a dry cloth. Be very careful
not to scratch the glass surface.
6
Replace the roller by inserting the left end first followed by the
right end, then rotating the bushing until it locks into place.
right end, then rotating the bushing until it locks into place.
7
Reconnect the support and the control panel and then close
the control panel firmly until it clicks into place.
the control panel firmly until it clicks into place.