Ricoh c410dn Softwarehandbuch

Other Print Operations

106

This section gives instructions for operating the printer when there is no tray for
the selected paper size or type, or when paper loaded in the printer has run out.

❒ The tray cannot be changed if the following functions are set:

• Duplex Print to a tray that does not support duplex printing
• Cover Sheet
• Slip Sheet

❒ If form feed is selected for a tray with the following settings, you can change

the tray by canceling the settings:
• Duplex  Print

If Auto Continue is selected, form fed paper is printed after a set interval. For
details, see p.152 “Auto Continue”.

If the printer does not have a tray for the selected paper size or paper type, or if
the selected paper loaded in the printer has run out, a caution message appears.
If this message appears, do the following procedure.

A

B

Select the tray for form feed using the {U} or {T} key from those that ap-
pear on the display panel, and then press the {OK} key.
If you want to print after adding paper to the tray, select the tray after loading
the correct paper.

The printer prints using the selected tray.

❒ If a tray with a smaller paper size is selected, the print job may be cut short,

or other problems may occur.