Ricoh c410dn Softwarehandbuch
Using a Printer Server
256
7
❖ Printers listed by SmartDeviceMonitor for Admin
SmartDeviceMonitor for Admin lists printers connected to the network. If
you cannot identify the printer you want to configure, print configuration
page, and then check the printer name.
you cannot identify the printer you want to configure, print configuration
page, and then check the printer name.
Setting Up as a Print Server (NetWare 3.x)
Follow the procedure below to connect the printer as a print server using Net-
Ware 3.x.
Ware 3.x.
A
Start Web Image Monitor.
B
Click [Login].
A dialog box for entering the login user name and password appears.
A dialog box for entering the login user name and password appears.
C
Enter the login user name and password, and then click [Login].
For details about the login user name and password, consult your network
administrator.
For details about the login user name and password, consult your network
administrator.
D
Click [Configuration]] in the left area, and then click [NetWare].
• Print Server Name: Enter the NetWare print server name. To use the inter-
• Print Server Name: Enter the NetWare print server name. To use the inter-
face board as a print server, enter the name of a print server that is not ac-
tive on the file server. Use up to 47 characters.
tive on the file server. Use up to 47 characters.
• Logon Mode: Specify whether to designate a file server or NDS tree when
logging on to NetWare.
• File Server Name: When a file server name is entered here, only the specified
file server is searched for. This item is mandatory. Use up to 47 characters.
• NDS Tree: To enable NDS mode, enter the name of the NDS tree you want
to log on to. Use up to 32 alphanumeric characters.
• NDS Context Name: To enable NDS mode, enter the print server context.
Use up to 127 characters.
• Operation Mode: Specify whether to use the interface board as a print serv-
er or a remote printer.
• Remote Printer No.: This item is effective when the interface board is spec-
ified as a remote printer. Enter the same number as the number of the
printer to be created on the print server (0 to 254 characters).
printer to be created on the print server (0 to 254 characters).
• Job Timeout: When the interface board is used as a NetWare remote print-
er, the printer cannot detect when a print job ends. Therefore, the printer
terminates printing when a certain period of time has elapsed since it last
received print data (i.e., when it has not received print data for a certain pe-
riod of time). Specify here this period of time (3 to 255 seconds). The initial
value is 15 (seconds).
terminates printing when a certain period of time has elapsed since it last
received print data (i.e., when it has not received print data for a certain pe-
riod of time). Specify here this period of time (3 to 255 seconds). The initial
value is 15 (seconds).
• Frame Type: Select the frame type from the drop-down menu.
• Print Server Protocol: Select the protocol for NetWare from the drop-down
• Print Server Protocol: Select the protocol for NetWare from the drop-down
menu.
• NCP Delivery Protocol: Select the protocol for NCP delivery.