Ricoh IS200e Bedienungsanleitung
Configuring the Scanner Settings
98
3
❖
❖
❖
❖ Search Base
This item is to configure the search base at time of [LDAP Authentication]. You
can enter the LDAP Directory for the LDAP authentication.
can enter the LDAP Directory for the LDAP authentication.
Note
❒ Be sure to reboot the system after this configuration.
Information to Register in [Time Server]
It can assign a poling interval of the time server, by using: [Configuration]
→[Basic
Settings]
→[Time Server]
Note
❒ Be sure to reboot the system after this configuration.
❖
❖
❖
❖ Time Server IP Address
This assigns the IP address of the time server using numeric from 0 to 9. If you
do not use the time server, specify “000.000.000.000”. “225.225.225.225” is
prohibited to use.
do not use the time server, specify “000.000.000.000”. “225.225.225.225” is
prohibited to use.
❖
❖
❖
❖ Polling Interval
Configure the poling interval by selecting either [When Scanner On] or [Con-
stant Intervals]
stant Intervals]
with the radio button if you have selected [Constant Intervals] en-
ter numeral within a range of 15 to 10080.
Note
❒ You can view all the information displayed, regardless of the screen size, but
the character line may be returned. A scroll bar may be equipped.
❒ When you shift to another screen during configuration, the configured data
will be discarded at the time.
Information to register in [Send File Path]
You can register a path for sending scanned data to a shared folder using SMB.
Up to 1000 destination folders can be registered.
Up to 1000 destination folders can be registered.
Reference
See the Web Status Monitor Help for information about how to register a
Send File Path.
See the Web Status Monitor Help for information about how to register a
Send File Path.
❖
❖
❖
❖ Program No.
Enter a number for the destination folder between 00001 and 50000. You can-
not enter a number already used.
not enter a number already used.
Note
❒ The first unused program number is displayed as the default.
❖
❖
❖
❖ File Send Path Name
Enter a name for identifying the destination folder, using up to 80 characters.