Ricoh IS200e Bedienungsanleitung
Setting Originals
122
4
Placing the Original on the
Exposure Glass
Exposure Glass
Important
❒ Be careful not to pinch your fingers
when closing the ADF.
❒ To activate the auto detection of an
original, place the original after
this machine starts up.
this machine starts up.
AAAA
Lift the ADF.
Note
❒ Be sure to lift the exposure glass
cover or ADF more than 30°.
Otherwise, the size of the origi-
nal might not be detected cor-
rectly.
Otherwise, the size of the origi-
nal might not be detected cor-
rectly.
BBBB
With the side to be scanned facing
down, place the original on the
exposure glass, and align it with
the home position and scale.
down, place the original on the
exposure glass, and align it with
the home position and scale.
Important
❒ Do not press down on the expo-
sure glass. Strong pressure on
the exposure glass could cause
it to break.
the exposure glass could cause
it to break.
A
When the original layout is por-
trait:
trait:
B
When the original layout is
landscape:
landscape:
When a document is set in this
direction, it is generally neces-
sary to change the document
setting direction at the point of
transmission.
direction, it is generally neces-
sary to change the document
setting direction at the point of
transmission.
CCCC
Gently lower the ADF.
AFJ006S
AFJ049S
ADG015S