Ricoh IS200e Bedienungsanleitung
Performing Scan Operation
141
5
To start with an original on the exposure
glass
glass
AAAA
Confirm that the E-mail Ready
screen is displayed.
screen is displayed.
W h e n “
S e l e c t d e s t i n a -
tion(s).
” is displayed, no desti-
n a t i o n i s s e l e c t e d . S e l e c t a
destination to display “
destination to display “
Ready
” on
the screen.
BBBB
Press the
{{{{Start}}}} key.
Scanning the original on the expo-
sure glass starts.
sure glass starts.
Note
❒ To interrupt scanning, press the
{{{{Clear/Stop}}}} key.
After the original is scanned prop-
erly, the message “
erly, the message “
Set the next
original(s) and press the
Start key, or press [Finish]
to complete.
” appears.
CCCC
Place the next original on the ex-
posure glass, and then press the
posure glass, and then press the
{{{{Start}}}} key.
DDDD
Repeat step
as necessary.
EEEE
Press [Finish] when all the origi-
nals are scanned.
nals are scanned.
Note
❒ When “
Show Options after
Each Scan Job
” is selected for
[End of Scan Option]
under
[2.Send Scan Settings]
, a screen
for selecting the next operation
appears after you press [Finish].
appears after you press [Finish].
When scanning finishes properly,
the e-mail is sent to the e-mail
(SMTP) server.
the e-mail is sent to the e-mail
(SMTP) server.
B appears at the
upper right corner of the screen
while the e-mail is sent.
while the e-mail is sent.
Note
❒ You cannot perform any opera-
tions while
B is displayed on
the screen.
❒ Do not turn the power of this
machine off while
B is dis-
played on the screen.
B disappears when the e-mail has
been sent to the e-mail (SMTP)
server, and the E-mail standby
screen appears.
been sent to the e-mail (SMTP)
server, and the E-mail standby
screen appears.
AFJ044S