Ricoh AP610N Netzwerkanleitungen

Monitoring and Configuring the Printer

100

The printer clock can be synchronized
with a NTP server clock using Simple
Network Time Protocol (SNTP). Use
the "sntp" command to change SNTP
settings.

❖

❖

❖

❖ View settings

❖

❖

❖

❖ NTP server address configuration

You can specify the IP address of
the NTP server.

❖

❖

❖

❖ Interval configuration

• You can specify the interval at

which the printer synchronizes
with the operator-specified
NTP server. The default is 60
minutes.

• The interval can be entered be-

tween 16 and 16,384 minutes.

• If you set 0, the printer synchro-

nizes with the NTP server only
when you turn the printer on. Af-
ter that, the printer does not syn-
chronize with the NTP server.

❖

❖

❖

❖ Time-zone configuration

• You can specify the time differ-

ence between the printer clock
and NTP server clock. Time is in
24-hour format.

Use the “spoolsw” command to con-
figure Job Spool settings.
You can only specify diprint, lpr, ipp,
ftp and smb protocol.
• The “spoolsw” command for con-

figuring Job Spool settings is avail-
able only when the optional hard
disk is installed.

❖

❖

❖

❖ View settings

The Job Spool setting appears.

❖

❖

❖

❖ Job Spool setting

❒ Specify "on" to enable Job Spool,

or "off" to disable it.

❖

❖

❖

❖ Resetting Job spool setting

• When the printer power is cut

during job spooling, this deter-
mines whether to reprint the
spooled job.

❖

❖

❖

❖ Protocol configuration

• You can specify the settings for

diprint, lpr, ipp, and smb.