Ricoh AP610N Netzwerkanleitungen
Monitoring and Configuring the Printer
104
4
keyphrase [
“phrase” ] val
[1|2|3|4]
“phrase” ] val
[1|2|3|4]
You can specify
the WEP key when
entering in ASCII.
the WEP key when
entering in ASCII.
With a 64-bit WEP,
you can use 10 dig-
it hexadecimals.
With a 128-bit
WEP, you can use
26 digit hexadeci-
mals.
you can use 10 dig-
it hexadecimals.
With a 128-bit
WEP, you can use
26 digit hexadeci-
mals.
Up to four WEP
keys can be regis-
tered. Specify the
number to be reg-
istered with “val”.
keys can be regis-
tered. Specify the
number to be reg-
istered with “val”.
When a WEP is
specified by key
phrase, the WEP
specified by key is
overwritten.
To use this func-
tion, set the same
key number and
WEP key for all
ports that transmit
data to each other.
You can omit the
numbers with
“val”. The key
number is set to 1
when making
these omissions.
specified by key
phrase, the WEP
specified by key is
overwritten.
To use this func-
tion, set the same
key number and
WEP key for all
ports that transmit
data to each other.
You can omit the
numbers with
“val”. The key
number is set to 1
when making
these omissions.
encval [1|2|3|4]
You can specify
which of the four
WEP keys is used
for packet encod-
ing. “1” is set if a
number is not
specified.
which of the four
WEP keys is used
for packet encod-
ing. “1” is set if a
number is not
specified.
auth
[open|shared]
[open|shared]
You can set an au-
thorization mode
when using WEP.
The specified val-
ue and authorized
mode are as fol-
lows:
thorization mode
when using WEP.
The specified val-
ue and authorized
mode are as fol-
lows:
open: open system
authorized (de-
fault)
authorized (de-
fault)
shared: shared key
authorized rate
authorized rate
Parameter
Value configured
rate [au-
to|11m|5.5m|2m
|1m]
to|11m|5.5m|2m
|1m]
You can set the
IEEE 802.11b trans-
mitting speed.
IEEE 802.11b trans-
mitting speed.
The speed you
specify here is the
speed at which
data is sent. You
can receive data at
any speed.
specify here is the
speed at which
data is sent. You
can receive data at
any speed.
auto: automatical-
ly set (default)
ly set (default)
11m: 11 Mbps
fixed
5.5m: 5.5 Mbps
fixed
fixed
5.5m: 5.5 Mbps
fixed
2m: 2 Mbps fixed
1m: 1 Mbps fixed
Parameter
Value configured