Ricoh AP610N Netzwerkanleitungen
Connecting and Setting Up
10
2
Connecting to the Ethernet
Interface
Interface
The network interface board supports
10BASE-T or 100BASE-TX connections.
10BASE-T or 100BASE-TX connections.
Important
❒ Before making the connection, touch
the metallic part to ground yourself.
AAAA
Turn off the main power switch.
Important
❒ Make sure the main power is
off. See “Turning On the Pow-
er”, General Settings Guide.
er”, General Settings Guide.
BBBB
Connect the Ethernet interface cable
to the 10BASE-T/100BASE-TX port.
to the 10BASE-T/100BASE-TX port.
Note
❒ The position of the port differ
depending on the machine type.
CCCC
Turn on the main power switch.
1.
Indicator (green)
Remains green when the machine is
properly connected to the network.
properly connected to the network.
2.
Indicator (yellow)
Turns yellow when 100 BASE-TX is
operating. Turns off when 10 BASE-T
is operating.
operating. Turns off when 10 BASE-T
is operating.
Connecting to the IEEE 1394
Interface
Interface
Important
❒ Before making the connection, touch
the metallic part to ground yourself.
Note
❒ Use the interface cable supplied with
the optional IEEE 1394 interface
board.
board.
❒ Make sure the interface cable is not
looped.
AAAA
Turn off the main power switch.
Important
❒ Make sure the main power is
off. See “Turning On the Pow-
er”, General Settings Guide.
er”, General Settings Guide.
BBBB
Connect the IEEE 1394 interface
cable to the IEEE 1394 ports.
cable to the IEEE 1394 ports.
Note
❒ Two interface ports are available
for connecting the IEEE 1394 in-
terface cable. Either is suitable.
terface cable. Either is suitable.
❒ If you have an interface cable
with a ferrite core, connect the
end nearest to the ferrite core to
the machine.
end nearest to the ferrite core to
the machine.
❒ The position of the port differ
depending on the machine type.
CCCC
Turn on the main power switch.
ZZZ019S
ZZZ023S
ZZZ020S