Ricoh AP610N Zusätzliches Handbuch
Troubleshooting
84
SC2001
An error has occurred in the
resident font RAM.
resident font RAM.
Turn the power off, and then on. If the
message appears again, contact your
sales or service representative.
message appears again, contact your
sales or service representative.
SD authenticatn.
failed
Authentication from the SD
card has failed.
card has failed.
Turn the power off, and then on. If the
message appears again, contact your
sales or service representative.
message appears again, contact your
sales or service representative.
Setting change
in process
During offline applications, set-
ting change is currently in pro-
cess.
ting change is currently in pro-
cess.
No action required.
SSID not entered
When pressing View to confirm
an ID, this message indicates
no ID has been entered.
an ID, this message indicates
no ID has been entered.
Enter requested ID.
Supply order
failed
Supply order has failed.
The use is required to reset the job.
Toner is almost
empty
The toner is almost run out.
Prepare a new toner cartridge. If the
Image Density gets too light, replace
the toner cartridge with a new one.
Image Density gets too light, replace
the toner cartridge with a new one.
See
.
Update Mode Err.
Power Off On
The printer has failed to start
updating data.
updating data.
Turn the printer OFF and then back to
ON.
ON.
Waiting...
The printer is waiting for the
next print job.
next print job.
Wait a while.
Warming up...
The printer is warming up or
toner is being supplied.
toner is being supplied.
Wait until the panel display change
the [Ready].
the [Ready].
Messages/Second
messages
Description
Solution