Ricoh is01 Betriebsanweisung
SCANNER SPECIFICATIONS
5-6
RS-232C Interface
This interface is provided for connection of the optional Operation Panel. It
requires a standard RS-232C cross cable (3 meters maximum length) for
connection. The scanner side of the cable should have a 25-pin male connector,
while the other end of the cable should have a connector that matches the needs
of your host computer.
The table below lists pin assignments for the RS-232C interface.
requires a standard RS-232C cross cable (3 meters maximum length) for
connection. The scanner side of the cable should have a 25-pin male connector,
while the other end of the cable should have a connector that matches the needs
of your host computer.
The table below lists pin assignments for the RS-232C interface.
RS-232C pin assignments
Code
Signal
Pin
FG
Frame Ground
1
TXD
Transfer Data
2
RXD
Receive Data
3
SG
Signal Ground
7
All other pins of the RS-232C interface are not connected.