Ricoh sp c811dn Betriebsanweisung

• Make sure paper is not stacked higher than

the paper guides inside the bypass tray.

Duplex printing

Not supported

Envelope setup

Default: [Envelope 1]
If the print quality needs to be improved, select a
paper type that is appropriate for the thickness of
the envelope you are using. Select [Maintenance]

[General Settings] [Envelope Setting] [En-

velope 1] to [Envelope 3].
High numbered settings allow thicker paper to be
used, but are printed more slowly.

Additional cautions

• Load envelopes with the print side down, and

the open end of the envelope facing out from
the printer.

• When printing on envelopes, set the envelope

size using the printer driver or control panel.
See p.110 "Loading custom size paper" for
details.

• Before loading envelopes, remove any air in-

side and make sure all edges are sharply
creased. If envelopes are curled, straighten
them before loading.

• If envelopes are curled when they are output,

straighten them by rubbing.

• Depending on the printing environment, en-

velopes may be output with the edges wrin-
kled, with toner marks on the back, or blurred.
In addition, when printing solid black areas,
streaks may appear where two envelopes
touch.

• Depending on the type of envelope or printing

environment, envelopes might be output
creased or printed improperly. In such cases,
try changing the loading orientation.

5. Paper and Other Media