Ricoh GX7000 Betriebsanweisung

Specifying the Interface and Network Settings

using the Printer's Control Panel (Host Interface

Menu)

In the Host Interface menu, you can make network settings and settings for the computer to printer USB
connection (if used). Settings made using the Host Interface menu remain effective even if you turn the
printer off.
To configure the printer's network settings, use “Network Setup” on the printer's control panel.
I/O Timeout

Specify how long the printer waits for the currently-connected interface to respond. When the specified
time elapses, the printer can receive data from another interface.
If you make the I/O Timeout period too short, timeout might occur while data transfer is in progress.
If this happens, the print job will be interrupted by a new job from another interface.

• 10 seconds
• 15 seconds
• 20 seconds
• 25 seconds
• 60 seconds

Default: 15 seconds

Network Setup

You can make network-related settings.
DHCP

You can specify the DHCP.

• On
• Off

Default: On

IP Address

You can specify the IP address.
When DHCP is set to on, the IP address cannot be changed. To change it, set DHCP to off.
Contact your network administrator for information about the network configuration.
Default: 0.0.0.0

Subnet Mask

You can specify the subnet mask.

2. Preparing for Printing