Ricoh ap1400 Benutzerhandbuch
Type 1 Printer: Loading Paper and Other Media
83
9
A
Pull the paper tray out until it
stops. After that, lift it slightly,
then pull it out of the printer.
stops. After that, lift it slightly,
then pull it out of the printer.
Note
❒ Do not touch the three white
pins on the right front side of
the printer.
the printer.
B
Adjust the paper size dial to
match the size and feed direction
of paper in the paper tray.
match the size and feed direction
of paper in the paper tray.
Important
❒ If you want to use paper sizes or
feed directions that are not list-
ed on the paper size dial, adjust
the dial to “
ed on the paper size dial, adjust
the dial to “
p”. In this case, you
should specify the paper size
using the operation panel.
using the operation panel.
C
Adjust the rear and side guides to
the paper size you want to load.
the paper size you want to load.
D
Load paper into the paper tray
with the print side up.
with the print side up.
Important
❒ Make sure the top of the stack is
not higher than the limit mark
inside the tray.
inside the tray.
❒ Make sure the paper fits under
the rear guide.
E
While lifting the front side of the
tray, place the tray into the print-
tray, place the tray into the print-
TS3Y150E
3
A
TS3Y160E
TS3Y170E
TS3Y180E