Ricoh CL3000 Installationsanleitung
Network Interface Board Type 3000
35
1
Network Interface Board Type 3000
R CAUTION:
Important
❒ Before touching the Network In-
terface Board, touch something
metal to discharge any static elec-
tricity. Static electricity can dam-
age the Network Interface Board.
metal to discharge any static elec-
tricity. Static electricity can dam-
age the Network Interface Board.
❒ Do not subject the Network Inter-
face Board Interface Unit to physi-
cal shocks.
cal shocks.
AAAA
Check the contents of the package
for the following:
for the following:
❖
❖
❖
❖ Network Interface Board Type 3000
❖
❖
❖
❖ Ferrite Core ×××× 2
BBBB
Turn off the power, and then un-
plug the power cable.
plug the power cable.
CCCC
Remove the two screws that fas-
ten the controller board on the
back of the printer.
ten the controller board on the
back of the printer.
The removed screws will be used
in step
in step
I
to fasten the controller
board.
DDDD
While holding the handle, pull
out the controller board slowly.
out the controller board slowly.
EEEE
Remove USB2.0 Interface Unit.
• Do not touch the inside of the
controller board compartment. It
may cause a machine malfunc-
tion or a burn.
may cause a machine malfunc-
tion or a burn.
ZHBP910E
ZHBP911E
ZHBPA080E
ZHBPA020E
ZHBPB460E
AresPGBOptionSetup-F_FM.book Page 35 Monday, July 29, 2002 1:12 PM