Frigidaire gleb30t9fsa Benutzeranleitung

The TIMER ON/OFF 

 pad controls the Timer feature. The Timer serves as an extra timer in the kitchen that will

beep when the set time has run out. It does not start or stop cooking. The Timer feature can be used during any of the
other oven control functions, except during a self clean operation. Refer to “Minimum and Maximum Control Pad
Settings” for time amount settings.

 for 10 seconds

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

1.

Press 

. "--:--" will appear and "TIMER" will flash in

the display (Fig. 5).

2.

Press the number pads to set the desired time in the

display (example 

). Press 

. The time will

begin to countdown with "5:00" and "TIMER" will stay

in the display (Fig. 6). Note: If 

 is not pressed the

timer will return to the time of day after 25 seconds.

3.

When the set time has run out, "End" and "TIMER" will
show in the display (Fig. 7). The clock will sound with

3 beeps every 7 seconds until 

 is pressed.

Press 

. The display will return

to the time of day.

The TIMER ON/OFF 

 and CLEAN 

 pads control the Continuous Bake or 12 Hour Energy Saving features. The

oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is
left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous
Baking.

1.

Press and hold 

 for 10 seconds (Fig. 1). After 10

seconds "12h" or "- -h" will appear in the display and the
control will beep once.

2.

Press 

 to switch between the 12 Hour Energy

Saving and continuous bake features. Note: "12h" (Fig.
2) in the display indicates the control is set for the 12
Hour Energy Saving mode and "- -h" indicates the
control is set for the Continuous Bake feature (Fig. 3).

3.

Press 

 to accept the change (Fig. 4; display will

return to time of day) or press 

 to reject the change.