Nikon P1 Benutzerhandbuch

Seite von 183
20
Ba
sic
 P
hoto
g
ra
phy
Step 2–Frame the Picture
1
Ready the camera
Hold the camera steadily in both hands. Photo-
graphs can be framed in the monitor.
Don’t Block the Shot
To avoid dark or partially obscured pictures, keep your
fingers and other objects away from the lensflash
window
,  AF-assist illuminator,  microphone, and
antenna.
2
Frame your subject
Your Nikon digital camera is equipped with two
types of built-in zoom: optical zoom, in which the
camera’s telescoping lens can be used to magnify
the subject up to 3.5×, and digital zoom, in which
digital processing is used to further magnify the
image up to 4×, for a total of 14×. Use the zoom
buttons to frame your subject in the center of the
monitor:
• Press the j (W) button to zoom out from your
subject, increasing the area visible in the frame.
• Press the k (T) button to zoom in on your sub-
ject so that it fills a larger area of the frame.
To use digital zoom
When the camera is zoomed in to maximum mag-
nification, holding the k (T) button down for more
than two seconds will trigger digital zoom. The
zoom indicator will turn yellow. Use the k (T) and
j (W) buttons to adjust zoom in the digital zoom
range. To cancel digital zoom, press j (W) until
the zoom indicator turns white.
Zoom out
Zoom in
Indicator in monitor shows
amount of zoom when ei-
ther button is pressed
Digital zoom
NORM
14
1/60
F2.7
AUTO
NORM
14
1/60
F2.7
AUTO