Frigidaire gleq2152ces0 Bedienungsanleitung

PN 134508800 (0502)

Select  Damp Dry for items you wish to partially dry before
hanging or ironing.

             Note:  To prevent over-drying, not every
             dryness level is available with every cycle.

To change the dryness level, press DRYNESS until the
desired selection is made.  Select Normal   for most loads.

Occasionally a load may seem too damp or over-dried at the
end of the cycle. To increase drying time for similar loads in
the future, select More Dry. For loads requiring less drying
time, select Less Dry.

To select an option, press OPTIONS until the indicator for the
desired option flashes, then press SELECT.  If an option is not
available for a cycle, the indicator will not light.  Follow the
same steps to delete an option.

The Cycle Signal will sound at the end of the cycle and
periodically during Press Saver.

Select Shrink Guard to  lower the initial drying  tempera-
ture to protect  fabrics from overdrying.

Select Press Saver if the dried load might not be removed
promptly at the end of the cycle.  The dry load will continue
tumbling without heat for 30 minutes to help reduce wrin-
kling. When the Cycle  Signal is selected, a beep will be heard
periodically.  The load may be removed any time during Press
Saver.

Control
To avoid having someone accidentally start or stop the dryer,
press OPTIONS and SELECT at the same time until the Control
     indicator is lighted.  To remove the control lock, press
OPTIONS and SELECT again.

Status Lights
The following indicators may be lighted during the cycle:
•    Drying

•    Cool Down

•    Press Saver

•    Clean Lint Filter

•    Control

Bulky
Select this cycle to dry a comforter, blanket, sleeping bag or
similar item.Cool Down is approximately 10 minutes.

Timed Dry
To manually select the drying time for any load, turn the knob
to a numbered setting.  Drying times from 15 to 90 minutes
are available in 15-minute increments.  You will not be able to
select a cycle or dryness level.  Timed Dry is recommended
when using the No Heat option.

    Note:  To change cycles, press PAUSE/CANCEL twice.

A suitable combination of drying temperature,
dryness level and options will automatically be
displayed for each cycle.  The settings can be changed
before the cycle is started.  Those
adjustments will automatically be remembered each time that
cycle is selected.  If a temperature, dryness level or option is
not recommened for a cycle, the indicator will not light.  See
the “Dryer Settings Chart” for more details.

If changes are attempted after the cycle starts, the status
lights will blink and the signal will beep 3 times.  The cycle
must be paused before the settings can be changed.  Press
PAUSE/CANCEL once to pause the cycle and change set-
tings.

 

 

To avoid fire hazard, do not use heat to

dry items containing feathers or down, foam rubber, plastic,
or similarly textured, rubber-like materials. Use the No Heat
setting only.

High  heat is recommended for sturdy fabrics.

Medium High heat is recommended for most cotton
fabrics.

Medium  heat is recommended for wrinkle free, permanent
press and lightweight fabrics.

Low  heat is recommended for delicate fabrics.

For best results, follow the fabric care label
instructions on items to be dried.  To change the drying tem-
perature, press TEMP to scroll to the desired heat.  To protect
your wardrobe, not all temperatures are available with every
cycle.

No Heat should only be used with a Timed Dry  setting to dry
items containing feathers, down, foam rubber, plastics or
rubber-like materials;  to freshen clothing, pillows or blan-
kets; or to dust draperies.

  Note: Using No Heat in any Auto Dry cycle  will result in
  long drying times and /or wet  loads at the end of the
  cycle.