Frigidaire feb30t7dcb Benutzeranleitung

NOTE: A smoke eliminator in the
oven vent converts most of the soil
into a colorless vapor.

(Note: If you do not want to start a Delayed Self-Clean Cycle, skips steps 2 & 3.)
1.

Be sure the clock shows the correct time of day.

2.

Press START TIME. "OVEN" and "TIME" will flash.

3.

Press and hold the UP ARROW pad to scroll to the time to start the delayed
Self-Clean cycle. Release the pad when the desired time is displayed.

4.

Press the CLEAN pad (for a 3 hour cycle) or SPEED CLEAN (for a 2 hour cycle).
"— — —" appears in the display.

5.

Press the UP ARROW pad once followed by the START pad.
As soon as the controls are set, the motor driven lock will begin to close
automatically and the “LOCK” indicator light will appear. DO NOT open the
oven door while the light is flashing (it takes about 15 seconds for the oven door
to lock).

6.

"CLn" will appear in the display during the Self-Clean cycle and the "LOCK"
light will glow until the Self-Cleaning cycle is complete or cancelled and the
oven temperature has cooled.

When the Self-Clean or Speed Clean Cycle is Completed:
1.

The time of day  or "End" will appear in the display window and the “Clean”
and "LOCK" light will continue to glow.

2.

Once the oven has cooled down for about 1 HOUR and the "LOCK" light has
gone out, the oven door can be opened.

3.

If "End" is in the display and the Select Clean indicator light remains ON, press
the CLEAR/OFF pad.  The time of day will appear in the display.

NOTE: When the oven is cool, wipe away any residue or powdered ash with a damp
cloth or paper towel.

If it becomes necessary to stop or interrupt a Self-Clean or a Speed Clean cycle:
1.

Press the CLEAR/OFF pad.

2.

Once the oven has cooled down for about 1 HOUR and the "LOCK" light has
gone out, the oven door can be opened.

3.

Restart the Self-Clean cycle once all conditions have been corrected.

1.

Press and hold the BAKE pad for 6 seconds. The display now indicates the amount
of degrees offset between the original factory temperature setting and the current
temperature setting. If the oven control has the original factory calibration, the display
will read "0".

2.

The temperature can now be adjusted up or down 35°F or 19°C, in 1°F or 1°C steps
by pushing and holding the UP or DOWN ARROW  pad.  Adjust until the desired
amount of degrees offset appears in the display. When lowering the oven tempera-
ture, a minus sign (-) will appear before the number to indicate that the oven will be
cooler by the displayed amount of degrees.

3.

When you have made the desired adjustment, press the START pad or wait 5 seconds
to go back to the time of day display.

Note: Oven temperature adjustment made will not change the Broil and the Self-Cleaning

feature temperatures.

 To avoid possible

burns use care when opening the
oven door after the Self-Cleaning
cycle. Stand to the side of the oven
when opening the door to allow hot
air or steam to escape.

  DO NOT force the

oven door open. This can damage
the automatic door locking system.
Use caution and avoid possible burns
when opening the door after the
Self-Cleaning cycle has completed.
The oven may still be VERY HOT.

For satisfactory results, use a 2 hour Self-Clean cycle for light soils and a 3 hour cycle for average to heavy soils.
NOTE: The kitchen area should be well ventilated using an open window, ventilation fan or exhaust hood during the Self-
Clean cycle. This will help eliminate the normal odors associated with the Self-Clean cycle.