Frigidaire fef354cgsa Benutzeranleitung
19
Changing Oven Light
(some models)
Be sure the range is unplugged and all parts are COOL before
replacing the oven light. Wear a leather-faced glove for protection against
possible broken glass.
possible broken glass.
The oven light automatically turns on when the door is opened. To turn the oven
light on and off when the door is closed, use the oven light switch located on the
control panel.
light on and off when the door is closed, use the oven light switch located on the
control panel.
To Change the Oven Light (some models)
1.
1.
Turn electrical power off at the main source or unplug the range.
2.
Press wire holder to one side to release the glass shield.
3.
Replace bulb with a new 40 watt appliance bulb.
4.
Replace glass shield over bulb and snap wire holder into place.
5.
Turn power back on again at the main source (or plug the range back in).
6.
The clock (if equipped) will then need to be reset. To reset, see Setting the
Clock and Minute Timer in this Owner's Guide.
Clock and Minute Timer in this Owner's Guide.
The temperature in the oven has been set at the factory. When first using the
oven, be sure to follow recipe times and temperatures. If you think the oven is
too hot or too cool, the temperature in the oven can be adjusted. Before
adjusting, test a recipe by using a temperature setting that is higher or lower
temperature than the recommended temperature. The baking results should
help you to decide how much of an adjustment is needed.
oven, be sure to follow recipe times and temperatures. If you think the oven is
too hot or too cool, the temperature in the oven can be adjusted. Before
adjusting, test a recipe by using a temperature setting that is higher or lower
temperature than the recommended temperature. The baking results should
help you to decide how much of an adjustment is needed.
To Adjust Oven Temperature:
1.
1.
Push BAKE.
2.
Set the temperature to 550°F (287°C) by pushing and holding the UP ARROW.
3.
Within 2 seconds, push and hold BAKE until the special 2 digit display appears.
Release BAKE. The display now indicates the amount of degrees offset between
the original factory temperature setting and the current temperature setting. If
the oven control has the original factory calibration, the display will read "00."
Release BAKE. The display now indicates the amount of degrees offset between
the original factory temperature setting and the current temperature setting. If
the oven control has the original factory calibration, the display will read "00."
4.
The temperature can now be adjusted up or down 35°F (17°C), in 5°F (1°C)
steps, by pushing and holding the UP or DOWN ARROW. Adjust until the desired
amount of offset appears in the display.
steps, by pushing and holding the UP or DOWN ARROW. Adjust until the desired
amount of offset appears in the display.
5.
When you have made the desired adjustment, push CANCEL to go back to the
time of day display. When adjusting oven temperature, a minus sign (-) will
appear before the number to indicate that the oven will be cooler by the
displayed amount of degrees.
time of day display. When adjusting oven temperature, a minus sign (-) will
appear before the number to indicate that the oven will be cooler by the
displayed amount of degrees.
Adjusting Oven
Temperature
Temperature
Note: The adjustments made will not
change the self-cleaning temperature.
change the self-cleaning temperature.