Frigidaire fef356g Betriebsanweisung

9

Note: The time of day must first be set in order to operate the oven.

*Note: The OVEN indicator light on the electronic display
will turn ON & OFF when using the Bake feature & during
preheat. This is normal & indicates that the oven is cycling
to maintain the selected baking temperature. When the
preheat indicator light turns OFF, your oven is ready.

When choosing a function, a beep will be heard each time a
pad is pressed. If desired, the control can be programmed

for silent operation. Press and hold 

. After 7 seconds,

the control will beep once. This will block the controls from
sounding when a pad is pressed. To return the sound, press

and hold 

 again for 7 seconds until the control beeps

once.

NOTE: To turn the time of day display OFF or ON in the display press 

 and hold for 15 seconds (the control will beep

once) and then release. This feature does not remove the set time of day from the memory of the control. When the display

is turned OFF the time of day will re-appear for a few seconds any time the 

 pad is touched.

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with
the various pad functions of the oven as described below.

BROIL PAD— Used to
select the variable broil
function.

UP and DOWN ARROW PADS— Used along
with the function pads to select oven
temperature, cook time, start time (when
programming an automatic start time), time
of day, clean time and minute timer.

BAKE PAD—Used
to select the bake
function.

SELF-CLEAN PAD—
Used to select the Self-
Cleaning cycle. A 2 or 3
hour Self-Clean time may
be selected.

OVEN, PREHEAT & DOOR LOCKED LIGHTS* — The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated.

FEATURE INDICATOR LIGHTS—
These light to show which feature
is in use.

CLOCK PAD— Used
to set the time of day.

CLEAR/OFF PAD— Used to clear
any function previously entered
except the time of day and minute
timer. Press CLEAR/OFF to stop
cooking. Also the CLEAR/OFF  pad
is used to activate oven door lockout
setting.

TIMER ON/OFF
PAD— Used to set or
cancel the minute
timer. The minute timer
does not start or stop
cooking. Also,
TIMER ON/OFF pad is
used to set the
Continuous Bake
feature.

START TIME PAD— Used
to set the desired start time
for baking & Self-Clean.
May be used with BAKE
TIME to program a delayed
bake cycle.

BAKE TIME
PAD— Used to
enter the length of
the baking time.

The electronic oven control is set to operate in °F
(Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C
to 287°C).

1.

Press 

 . "— —" appears in the display.

2.

Press and hold the 

 until "HI" appears in the

display.

3.

Press and hold 

 until °F or °C appears in the

display.

4.

Press the 

 to change °F to °C or °C to °F.

5.

Press any control pad to return to normal operating
mode.

Note: The time of day must first be set in order to operate the oven.