Frigidaire fgef304dk Betriebsanweisung

CARE & CLEANING

•

Aluminum foil

Use of aluminum foil will damage the cooktop. Do not

use under any circumstances.

•

Aluminum utensils

Since the melting point of aluminum is much lower

than that of other metals, care must be taken when

aluminum pots or pans are used. Pans that boil dry

may permanently damage cooktop by breaking, fusing

to, or marking it.

CLEANING RECOMMENDATIONS FOR THE

CERAMIC GLASS COOKTOP (CONTINUED)

Plastic or foods with a high sugar content:

These types of soils need be removed immediately if spilled

or melted onto the ceramic cooktop surface. Permanent

damage (such as pitting of the cooktop surface) may occur

if not removed immediately. After turning the surface

elements OFF, use a razor blade scraper or a metal spatula

with a mitt and scrape the soil from the hot surface (as

illustrated). Allow the cooktop to cool, and use the same

method for heavy or burned on soils.

Do not use the following on the ceramic glass

cooktop:

• Do not use abrasive cleaners and scouring pads,

such as metal and some nylon pads. They may

scratch the cooktop, making it more difﬁ cult to

clean.

• Do not use harsh cleaners, such as chlorine

bleach, ammonia or oven cleaners, as they may

etch or discolor the cooktop.

• Do not use dirty sponges, cloths or paper

towels, as they can leave soil or lint on the

cooktop which can burn and cause Special

Caution for Aluminum Foil and Aluminum

Cooking Utensils

CARE AND CLEANING OF STAINLESS STEEL

Some models are equipped with stainless steel exterior

parts. Special care and cleaning are required for

maintaining the appearance of stainless parts. Refer

to the General Care & Cleaning table for detailed

cleaning instructions.

CAUTION

Be sure the oven is unplugged and all parts are COOL

before replacing the oven light bulb. Do not turn

the oven light on during a self-cleaning cycle. High

temperature will reduce lamp life.

CAUTION

BE SURE OVEN IS COOL

CHANGING OVEN LIGHT

On some models an interior oven light will turn on

automatically when the oven is opened. The oven light

may be turned on when the door is closed by using the

oven light switch located on the Electronic Oven control.

The oven light bulb is covered with a glass shield held

in place by a wire holder. THIS GLASS SHIELD MUST

ALWAYS BE IN PLACE WHEN THE OVEN IS IN USE.

To Replace the Light Bulb:
1. Turn the power off at the main source.

2. Wear a leather-faced glove for protection against

possible broken glass.

3. Replace bulb with a 40 Watt appliance bulb only.

4. For self-cleaning oven, press wire holder to one side

to release glass shield, change bulb and be sure to

replace glass shield.