Frigidaire glcs389fsa Benutzeranleitung

The TIMER ON/OFF 

 pad controls the Timer feature. The Timer serves as an extra timer in the kitchen that will beep

when the set time has run out. It does not start or stop cooking. The Timer feature can be used during any of the other
oven control functions. Refer to “Minimum and Maximum Control Pad Settings” for time amount settings.

 for 7

seconds

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

Figure 7

1. Press 

. "0:00" will appear and "TIMER" will flash in the

display (Figure 5).

2. Press the number pads to set the desired time in the display

(example 

). Press 

. The time will begin to count down

with "5:00" and "TIMER" will stay in the display (Figure 6).

Note: If 

 is not pressed the timer will return to the time of

day after 25 seconds.

3. When the set time has run out, "End" and "TIMER" will show in

the display (Figure 7). The clock will sound with 3 beeps every 7

seconds until 

 is pressed.

Press 

. The display will return to the time of day.

The TIMER ON/OFF 

 and CLEAN 

 pads control the Continuous Bake or 12 Hour Energy Saving features. The

oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left
on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.

1. Press and hold 

 for 7 seconds (Figure1). After 7 seconds

"12Hr" or "- -Hr" will appear in the display and the control will
beep once.

2. Press 

 to switch between the 12 Hour Energy Saving and

continuous bake features. Note: "12Hr" (figure 2) in the display
indicates the control is set for the 12 Hour Energy Saving mode
and "- -Hr" indicates the control is set for the Continuous Bake
feature (Figure 3).

3. Press 

 to accept the change (Figure 4; display will return

to time of day) or press 

 to reject the change.