Frigidaire plgfmz98g Betriebsanweisung

9

The CLOCK 

 pad is used to set the clock. The clock may be

set for 12 or 24 hour time of day operation.  The clock has been
preset at the factory for the 12 hour operation.  When the range is
first plugged in, or when the power supply to the range has been
interrupted, the timer in the display will flash the time of day (Fig. 1).

1.

Press 

 . (Fig. 2).

2.

Press 

 

 

 pads to set the time of day to 1:30 (Fig. 3).

Press 

. (Fig. 4).

1.

Press and hold 

 for 6 seconds (Fig. 3). CONTINUE holding

the pad until a beep is heard.

2.

The display will show either "12h"(Fig. 5) or "24h"(Fig. 6).

3.

Press  

  to switch between the 12 and 24 hour time of day

display. The display will show either "12h" (Fig. 5) or "24h" (Fig.
6).

4.

Press 

 to accept the desired change or press 

 to reject

the change.

5.

Reset the correct time as described in To set the Clock above.
Please note that if the 24 hour time of day mode was chosen,
the clock will now display time from 0:00 through 23:59 hours.

 

 

 

 

 for 6 seconds

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6