Frigidaire fpcf3091lf Betriebsanweisung

13

The cooktop power level display features provide a digital

display for each of the heating positions located on the

cooktop. Power levels are easily controlled and monitored

using the window displays in combination with the

corresponding control touch pads.

The cooktop control will display heat levels ranging from Hi

(Fig. 1) to Lo (Fig. 5) and OFF (Fig. 6).

The settings between 9.5 (Fig. 2) and 3.0 (Fig. 3) decrease

or increase in .5 increments. The settings between 3.0 (Fig.

3) and 1.2 (Fig. 4) are simmer settings which decrease or

increase in increments of .2 for more precision at lower

heat levels. Use the “Suggested power level settings

table” provided later in this section to determine the

correct setting for the type of food you are preparing.

After using a radiant element or induction cooking zone the

cooktop may be very hot. After turning any of these

elements OFF, the cooktop may remain HOT for some time.

The corresponding HE (hot element - Fig. 8) message will

remain ON and turn OFF once that element position on the

cooktop has cooled sufficiently (Fig. 6).

The (- -) message will appear whenever the  lockout

feature is active (See Fig. 9). Refer to the lockout

instructions for more details. When the Sabbath Day

feature is activated, the cooktop displays will show the

cooktop lockout “ - - ” messages.

When setting either induction cooking zone to the highest

level, the display will show Pb (Power Boost) power level

for up to 10 minutes (See Fig. 7). After 10 minutes the

cooking zone will automatically lower to the Hi setting. The

Pb setting is only available immediately after activating a

cooking zone and pressing the 

power level keypad.

Fig. 1

Fig. 2

Fig. 3

Fig. 5

Fig. 6

Fig. 7

Fig. 8

Fig. 9

When setting the size for all 3 bridge elements to heat

together, both the display windows for the left front and

left rear elements will display the set power level & hot

element message (for models with a bridge surface

element feature only).

Fig. 4

The induction cooktop will not operate when the oven is

set for Sabbath mode. To set the Sabbath Day feature

for the oven, see Setting Oven Controls section.