Frigidaire fpcf3091lf Betriebsanweisung

19

The 3 left radiant cooking elements may also be used

together as a single cooking area when setting for the

Bridge feature. The SpaceWise™ bridge radiant elements

are marked on your cooktop. This feature also provides the

flexibility to cook with larger oblong cookware.

Indicator lights located on the backguard for the bridge

show which portions of the bridge element are set to heat.

The

 symbol indicates only the left front element will

heat (Fig. 1). The

 symbol indicates both the left front

and left middle elements will heat together (Fig. 2).

The

 indicates that all 3 elements (left front, middle and

rear) will heat together (Fig. 3).

1.   Place correctly sized cookware on

the bridge radiant surface cooking zone.

2. Press and hold the on-off

for the bridge element position

until a beep is heard.

3. Press the desired element size

(once for left front, twice for

left front and left middle,

3 times for left front, middle and

rear).

4. Press lo, med (5.0) or hi.

Each touch of the lo or hi pad will

decrease or increase the power

level by .5 increments from 9.5

through 3.0. Simmer power levels

between 3.0 and 1.2 will decrease or

increase by .2 increments. lo is the

lowest power level available.

5. Once cooking has

completed, press on-off.

,

,

If all 3 bridge zones are in use with the bridge feature

and you need the left rear as a single element for a

different reason, change the bridge size to 

 or

and then set the left rear position independently.

Radiant surface elements may appear to have cooled

after they have been turned off. The glass surface may

still be hot and burns may occur if the glass surface is

touched before it has cooled sufficiently.

Do not place flammable items such as plastic salt and

pepper shakers, spoon holders or plastic wrappings on

top of the range when it is in use. These items could melt

or ignite. Potholders, towels or wooden spoons could

catch fire if placed too close to the surface elements.

See the Suggested power level settings table

(provided in the instructions for the single radiant

elements). The size and type of utensil used, and the

amount and type of food being cooked will influence the

setting needed for best cooking results.

•  The HE (hot element) message may appear in the

display windows once a heating element  is turned

OFF and will remain ON until the heating surface area

or areas have cooled sufficiently.

cooktop. If these items melt on the cooktop they may

damage the ceramic cooktop.

indicator light

indicator light

indicator light

Shaded areas show elements that will heat.

Fig. 1 (left front)

Fig. 2 (left front &

middle)

Fig.3 (left front,

middle & rear)