Arturia cs-80v Benutzerhandbuch
ARTURIA – CS-80V – USER’S MANUAL
70
Mac preference window
Protocol (Pc only): Select the audio protocol that you wish to use. If you have ASIO
drivers for your sound card, we recommend that you use this protocol instead of
drivers for your sound card, we recommend that you use this protocol instead of
DirectX. The ASIO drivers offer increased performances compared to the DirectX
drivers.
drivers.
Driver: Select the driver corresponding to the sound card that you want to use.
Frequency: Here choose the sampling frequency among those offered by your sound
card.
card.
Latency: Here you can set the optimal audio latency depending on the performance of
your sound card and your system. Attention, latency too weak can cause the sound to
jump.
jump.
Knob control type: Here choose the mode of instrument potentiometer control.
8.1.3 Configuration of an instrument: the tool bar
Each instrument has a tool bar allowing the setting of MIDI event input routing, and the
output of the sound.
output of the sound.
The PC tool bar
The Mac tool bar
8.1.3.1 Configuring MIDI routing
The first part of the tool bar lets you select the MIDI input that will be applied to the
instrument.
Choose the MIDI port to which your keyboard is connected, as well as the channel that
Choose the MIDI port to which your keyboard is connected, as well as the channel that
you want to use. You can choose to select a particular channel or all of the channels of
this port by selecting ‘All’ in the choice of MIDI channels.
this port by selecting ‘All’ in the choice of MIDI channels.