Microtek 1800f Bedienungsanleitung

ArtixScan 1800f Installation and Operation Manual     9

The ArtixScan 1800f's USB interface is a Hi-Speed USB 2.0 support port, which is
compatible with the original USB standard with the high/low data transfer rate via the
provided USB2.0 cable. Before making the USB connection, check to see if your
computer system has a built-in USB port (original USB standard) or upgrade to
include Hi-Speed USB 2.0 support port.

Currently, the Hi-Speed USB 2.0 runs only on the Windows operating system. If you
want to transfer data at high data rate, you should have installed the Hi-Speed USB
2.0 add-on card that works properly in your computer. For more details on how to
install the Hi-Speed USB 2.0 add-on card in your computer, please refer to the
documentation that came with your purchased USB 2.0 card.

Follow the steps below to make the USB connection.

1. Connect the power cord to your scanner.

Plug the power cord into the back of the
scanner, and plug the other end into a
power source (power surge protector
highly recommended). Make sure no other
cable is connected to the scanner except
the power cord at this point.

USB port usually
labeled with the
“

” logo..

2. Connect the scanner to your computer, using the provided USB 2.0 cable.

Connect one end of the USB 2.0 cable to your computer’s USB port, and connect
the other end of the cable to the scanner’s USB 2.0 port.