Sima wx-268 Benutzerhandbuch

1. Press the radio ON button to hear the voice broadcast. Adjust the volume knob as

needed.

2. Press and hold the PROGRAM key for 3 seconds.
3. SET DATE/TIME is displayed on the screen.
4. Turn the FUNCTION knob clockwise until SET WB

CHANNEL is displayed on the screen.

Press the NEXT (>) key to enter the WB Channel menu.
5. Turn the FUNCTION knob clockwise to select the correct

channel for your area, as identified by NOAA. Adjust the
telescopic antenna to ensure clear reception.

6.  Press the SAVE key to save the channel and return to normal operation.

Both NOAA and EAS use S.A.M.E. technology to identify locations. The WX-268

features a built-in database of over 3,000 county locations in the United States identified
by NOAA. Your Public Alert

TM

 radio is programmed at the factory to receive all the alerts

issued in a given county. This may include alerts that do not affect you. Selecting your
S.A.M.E. location can reduce unnecessary alerts.

To select your S.A.M.E. location, simply select your state, county and county

subdivision at the menu prompts as described below.

To set your SAME location:
1.  Press and hold the PROG key until SET DATE/TIME is

displayed on the screen.

2.  Turn the FUNCTION knob clockwise to select the SETUP

LOCATIONS menu. Press the NEXT (>) key.

 SET DATE/TIME

 SET WB CHANNEL

 WB CHANNEL 1

 SET DATE/TIME

 SETUP LOCATIONS

- 

Make sure the alert siren volume switch, located on the left

hand side of the radio,  is set to the volume level (Low/Hi) to your preference. Note:  If
the  switch is in the OFF position, the radio will not sound an alert tone.