Sima wx-268 Benutzerhandbuch

POWER light does not
come on

POWER light is blinking

Text is in the wrong lan-
guage

Siren does not sound

All 4 LED indicator lights are
on and “10 Day Alert
Sentry” is displayed on the
LCD screen.

No sound from the radio’s
speaker

There is only static when I
press the radio ON button.

Possible Cause and Solution
AC power may not be connected.
Make sure AC adaptser is properly plugged into the
radio and the wall outlet.

AC power has been removed. Unit is running on backup
battery power. Check AC adapter connections to restore
power.

Language selection is incorrect. To reset language
selection, follow instructions on page 12

1. Alert Volume switch may be in OFF position.  Set

switch to Lo or Hi position.

2. Alert Audio Output jack may be in use. Disconnect

external device from Alert Audio Output jack.

3. Alert is blocked.  To Unblock alerts see Event Block-

ing instructions on page 19.

Your radio has not received an alert for 10 days or more.
Weather channel or S.A.M.E. location programming may
be incorrect.
Re-program weather channel and S.A.M.E. according to
instructions on pages 14-15. Also make sure radio is
getting clear reception.

Check to make sure the Volume Knob is not at the
lowest level.
Check the Alert Audio output. Connecting a device to the
Alert Audio output, mutes the radio’s speaker.

1. May have programmed incorrect weather channel.  To

reset weather channel, follow instructions on page 13.

2. Poor reception. Adjust antennas, move radio location

or use external antenna.