Sima wx-268 Benutzerhandbuch

- The output jacks for the Remote Alert provide a floating relay contact output to external

warning devices. The contact will close when an alert broadcast has been received.
Do not exceed the maximum voltage or current rating of the contacts - 1 Amp (A) @
30V DC.

- Wipe unit with a damp cloth occasionally to clean. Do not use harsh chemicals, cleaning

solvents or strong detergents.

- Do not allow anything to rest on the power cord.
- Do not locate this product where persons walking on it could damage the cord. Keep

cord away from heated surfaces.

- To disconnect, grip the AC adapter and pull it from the wall outlet. Never disconnect by

pulling on the cord.

- This product is designed to operate using the AC adapter supplied in a household

application or 12V DC for portable use.

-  LCD screens can change color in extreme temperatures. If the unit is exposed to

temperatures below -20ºC (-5ºF) or above +60ºC (+140ºF), the display may
temporarily cease to function properly, or could result in permanent damage.

You should understand the danger of lightning striking an external antenna and
make appropriate measures to protect yourself from injury and fire hazard resulted
from a lightning strike on an external antenna.
- When an external antenna is used, make sure that there is sufficient lightning

protection on the antenna and its cable feed. Make sure all the ground
connections are sound and fit. Do not get close to the unit when it is operating
during a thunderstorm.

- Lower, retract or remove the telescopic antenna when using an external

antenna.

- Contact your external antenna supplier for more information on lightning

protection and grounding issues on your antenna. You could also get
information from lightning protection device suppliers.