Lowrance lcx-112c Bedienungsanleitung
196
To restore default settings
:
1. Press
MENU| MENU
, use
↑ ↓ to select
NMEA
2000
and press
ENT
. The
NMEA 2000 menu will appear with five options: Bus Setup, Fuel
Management, NMEA 2000 Alarms, Waypoint Sharing and Backlight
Management, NMEA 2000 Alarms, Waypoint Sharing and Backlight
Synchronization.
2. Highlight
2. Highlight
B
US
S
ETUP
and press
ENT
, which will open the Bus
Configuration menu. A list of network devices will be at the top of the
page.
3. Select the desired temp sensor and press
3. Select the desired temp sensor and press
ENT
. The Device
Configuration menu will appear.
4. Highlight
4. Highlight
A
DVANCED
O
PTIONS
and press
ENT
.
5. Select
R
ESTORE
D
EFAULTS
and press
ENT
. The following message will
appear: Are you sure you wish to change this device's configuration?
6. Highlight
6. Highlight
Y
ES
and press
ENT
. Press
EXIT
repeatedly to get back to the
main display.
EP-10 Fuel Flow Configuration
EP-10 Fuel Flow Configuration
To input Device Name:
1. Press
MENU| MENU
, use
↑ ↓ to select
NMEA
2000
and press
ENT
. The
NMEA 2000 menu will appear with five options: Bus Setup, Fuel
Management, NMEA 2000 Alarms, Waypoint Sharing and Backlight
Synchronization.
2. Highlight
2. Highlight
B
US
S
ETUP
and press
ENT
, which will open the Bus
Configuration menu. A list of network devices will be at the top of the
page.
3. Select the fuel flow you want to rename and press
page.
3. Select the fuel flow you want to rename and press
ENT
. The Device
Configuration menu will appear with the Device Name dialog box
highlighted.
4. Press
4. Press
ENTER
and use
↑ ↓, ← → to input the desired name for the fuel
flow. Press
ENT
. Press
EXIT
repeatedly to get back to the main display.
To select a Location:
1. Press
MENU| MENU
, use
↑ ↓ to select
NMEA
2000
and press
ENT
. The
NMEA 2000 menu will appear with five options: Bus Setup, Fuel
Management, NMEA 2000 Alarms, Waypoint Sharing and Backlight
Synchronization.
2. Highlight
2. Highlight
B
US
S
ETUP
and press
ENT
, which will open the Bus Configuration
menu. A list of network devices will be at the top of the page.
3. Select the desired fuel flow and press
3. Select the desired fuel flow and press
ENT
. The Device Configuration
menu will appear.
4. Select
4. Select
L
OCATION
and press
ENT
, which will open the Location menu
with following options: Port, Center, Starboard and Unknown.