Daewoo dvd3000n Benutzeranleitung

•  36 •

•   

ANALOG: No signal is output from the

coaxial port.

•   

SPDIF/RAW: Select this when the DVD

player is connected with a power amplifier
through coaxial port, refer to page 17.
When a Dolby Digital DVD, DTS DVD or
MPEG DVD is played,  the coaxial port
will  output  in  the corresponding
digital(Source code) format. The power
amplifier to be connected must have Dolby
Digital,  DTS  and  MPEG decoding.

•   

SPDIF/PCM: Select this when the DVD

player is connected with a 2-channel
digital mode or stereo amplifier (refer to
page 17 for the connection). When a Dolby
Digital or MPEG DVD is played, the
coaxial port will output in PCM 2-channel
format.

CAPTION was invented for hearing
impaired person. But it is very useful when
learning foreign languages. If your TV
supports closed caption, select ON. If not,
closed caption won’t be displayed.

•  ON

The hidden subtitle is shown.

•   OFF

The hidden subtitle is turned off.

Start  the  screen  saver,  the  screen saver
image  appears  when  the unit stops or
the image is frozen for a few minutes.
This  saver  can  keep  the screen from
being damaged.

•  ON: Start the screen saver.

•  OFF: Remove the screen saver.

You may select according to the colour
system of the TV to be connected.

• Select "AUTO" for a multi-system TV.
• Select "NTSC" for a NTSC TV.
• Select "PAL" for a PAL TV.

• Select "AUTO" for automatically setup.
• Select "HI-RES" for high-resolution picture.
• Select "N-FLICKER" for no flicker picture.

This only works when there is an angle
mark on the disc.
• Select "ON",the screen shows the mark

when playing a DVD.

• Select "OFF",the mark is not shown

.

•  ENGLISH

The OSD is in English.

• FRENCH

The OSD is in French.

• SPANISH

The OSD is in Spanish.

Notes:

In case of selecting SPDIF/RAW or
SPDIF/PCM, no signal is output from the
audio analog output.