Daewoo dvd5000n Benutzeranleitung

Seite von 44
•  40 •
TROUBLESHOOTING
If you experience the following problems
while using the unit, this  troubleshooting
guide can help you.
No sound
• Check if you press the MUTE.
• Check if the unit is properly connected.
• Make sure you operate the TV or
amplifier correctly.
• Make sure the DVD player or the
amplifier position is properly selected .
• Make sure the audio output is set
properly . (Check the audio output mode
of the general setup in Setup menu)
• Check whether the disc plays in slow or
fast forward (or reverse) mode.
No image
• Check if the unit is properly connected.
• Make sure you operate the TV correctly.
• Make sure you  set  the colour system
correctly.
Bad sound quality
• Make sure  the audio output mode is set
correctly.
• Make  sure  the  audio connection
between the unit and amplifier is right.
• Check whether the disc is dirty or
damaged.
Image rolls and no colour
• The  colour system set by this unit does
not match with  that  of  TV. Press
P/N  on  the  remote  control  to select
the correct one.
• Check whether the disc is dirty or
damaged.
Disc can not be played
• There is no disc in the unit.
• Insert the  disc  on  the disc tray properly
with the label side up.
• Clean the disc.
• Moisture has condensed in the unit.
Remove  the disc and  leave the unit  on
for about one hour.
• Make sure that the area code of disc is 1
or All. (In case of DVD, it may not play
the disk which come from abroad.) 
Remote control does  not work
• Remove  barriers  between  the  remote
control and the unit.
• Point the remote control at  the  remote
control sensor of the unit.
• Replace the batteries with new ones.
• Reference page 11.