Intermec cv60 Zusätzliches Handbuch

4

Mobile DC-DC Uninterruptible Power Supply Installation Guide

Connecting the UPS (Smart Mode)

Note: Remove the dust cover from the serial port

before connecting the cable.

1 Attach the RSĆ232 cable (PN 321-593-001) to COM1 or

COM2 on the CV60 and tighten the screws to the DBĆ9

connector.

2 Connect the other end of the RSĆ232 serial cable to the

RS-232 connector on the UPS and tighten the screws.

3 Connect the cable from the UPS power OUT to the CV60

power input connector. Tighten the connector.

4 Connect the cable (PN 226-341-003, six foot cable or PN

226-341-004, three foot cable) from the vehicle battery or

power supply to the dc input connector on the UPS.

Connecting the UPS (Standard)

1 Connect the cable (PN 226-341-003, six foot cable or PN

226-341-004, three foot cable)  from the vehicle battery or

dc-dc converter to the dc input connector on the UPS.

2 Connect the cable from the UPS power OUT to the CV60

power input connector. Tighten the connector.

Power/Charge Status LED

The LED lights when power is applied to the UPS.

S Amber: indicates UPS is charging
S Red: indicates UPS is discharging
S Green: indicates UPS is charged.

Note: Always have power to the UPS before booting

the CV60. Failure to do so may cause the UPS to

shut down.