Intermec 700 Betriebsanweisung
Assembly Diagram
The 714-502-004 Kit includes:
"
Scanner Handle
"
Two #6--32 custom handle-to-computer retaining screws
Insert 700 Mobile Computer in Scanner Handle by
sliding in as shown by the pointer arrow.
sliding in as shown by the pointer arrow.
1
2
Turn the Scanner Handle assembly over to insert
the two Mobile Computer retaining screws.
the two Mobile Computer retaining screws.
Retaining screws (one on each side)
The Scanner Handle Assembly provides access to the
connectors on the bottom of the Mobile Computer.
connectors on the bottom of the Mobile Computer.
3
If using a handle strap attached to the Scanner Handle,
install an eye-hook type that snaps over the pin on the
Scanner Handle.
install an eye-hook type that snaps over the pin on the
Scanner Handle.
Handle strap pin
If using the retaining screws, it’s recommended to
unhook the hand strap from the back of the Mobile
Computer. This allows access to the battery pack
without removing the computer from Scanner
Handle.
unhook the hand strap from the back of the Mobile
Computer. This allows access to the battery pack
without removing the computer from Scanner
Handle.