Intermec nx Verweisanleitung
Symbologies—Standard 2 of 5
176
MB/NX/RM/00/E/970131
Barcode length
Barcode length (number of characters) for Standard 2 of 5 = [barcode data + check digit if
applicable]. The minimum length possible is 3 characters.
applicable]. The minimum length possible is 3 characters.
For maximum security, we strongly recommend that you define 1, 2 or 3 fixed lengths.
Any Length (*)
Define 1 Or 2 Or 3 Fixed Lengths—
Use Number Codes
Use Number Codes
Define 1 Or 2 Or 3 Fixed Lengths—
Use Actual Code Lengths
Use Actual Code Lengths
Defining 1 or 2 or 3 fixed lengths using the number codes
1. Scan Define 1 Or 2 Or 3 Fixed Lengths—Use Number Codes.
2. Use the number codes provided on the back cover of this Installation Guide to enter 1, 2
or 3 lengths and scan End Selection after each length.
or 3 lengths and scan End Selection after each length.
If you only enter 1 or 2 fixed lengths, scan End Selection twice after the last length you
enter (after the first or second length as applicable).
enter (after the first or second length as applicable).
Defining 1 or 2 or 3 fixed lengths using actual code lengths
1. Scan Define 1 Or 2 Or 3 Fixed Lengths—Use Actual Code Lengths.
2. Scan the number code—1 or 2 or 3—corresponding to the number of lengths you want
to define using the number codes provided on the back cover of this Installation Guide.
to define using the number codes provided on the back cover of this Installation Guide.
3. Scan End Selection.
The first / second / third Standard 2 of 5 codes with different lengths that you read will fix the
accepted code lengths—the MicroBar NX will then not accept codes with other lengths.
accepted code lengths—the MicroBar NX will then not accept codes with other lengths.