Citel 6000 Betriebsanweisung
PBXgateway
™
& EXTender
TM
6000 System Administrator’s Guide
114
5. Access the 911 Analog Key using the following path:
Path: Remote->Configuration->Port_1-8->Port_1->More->Key Mapping
Figure 73: 911 Analog Key Mapping
6. Press
the
È
key to set the numeric “key”, which must be pressed on the remote telephone
before placing an analog call.
Note: Do not use a key that already has a function programmed.
Note: Do not use a key that already has a function programmed.
7. Press
the
Åkey to accept changes and go back to the Configuration Menu.
8. Press
the
Èkey to the Save option. Press Enter.
System Reboot (Gateway and Remote)
The PBXgateway or any remote can be rebooted through the Management Interface
(MI). This parameter is used for resetting the unit during troubleshooting or software
upgrades. The MI Reboot is a “soft” reboot, which means that the unit is re-started
through the software. A “hard” reboot refers to a re-start by unplugging the unit.
(MI). This parameter is used for resetting the unit during troubleshooting or software
upgrades. The MI Reboot is a “soft” reboot, which means that the unit is re-started
through the software. A “hard” reboot refers to a re-start by unplugging the unit.
Procedure
1. Select Reboot command using the following path:
Path: Utilities->System->Reboot
The following Warning appears:
The following Warning appears:
Figure 74: Reboot Warning
IMPORTANT NOTE: If the “y” selection is chosen, the following connections will be
terminated: All active phones, Telnet connection, FTP connection and in-band logins.
terminated: All active phones, Telnet connection, FTP connection and in-band logins.