ProctorSilex 46811 Betriebsanweisung

1. Reservoir
2. Brew Select Knob*
3. Brew Basket
4. Carafe
5. Keep-Hot Plate
*

Available on select models

1. Before first use, clean coffeemaker by following steps 

listed in “To Clean the Inside of the Coffeemaker.”

2. Place a large, cupcake-style disposable paper filter in 

brew basket.

3. For each cup of coffee being made, place one level 

tablespoon of coffee into filter; replace brew basket, 
making sure it is securely attached.

4. Fill carafe with the desired amount of cold tap water.
5. Pour water from carafe into reservoir.
6. Place carafe, with carafe lid attached, on Keep-Hot Plate.
7. Turn switch ON. Turn OFF and unplug when finished.

To Set Clock:
1. Plug in coffeemaker. Numbers on the clock will flash until

you set time of day.

2. To set time of day, press HOUR button to establish current

hour. A red dot will glow to indicate PM hours. If this dot is
not glowing, clock is set for an AM hour.

3. Press MIN. (minute) button until you reach the current time.

To Set and Use Automatic Brew: 
1. Make sure clock is set for correct time of day.
2. Fill coffeemaker with desired amount of water and coffee.

Place carafe with lid on Keep-Hot Plate.

3. While holding PROG. (program)

button, press HOUR and MIN.
buttons until the desired brew-
ing time is reached. A red dot
means PM.

4. Once brewing time has been

set, to have coffeemaker 
automatically begin brewing, 
follow this procedure each time
to reset the Automatic Brew:
• Switch must first be in the 

Off position. Then slide to AUTO.

The Automatic Shutoff feature shuts off the Keep-Hot Plate
two hours after the brew cycle begins. Always turn the 
coffeemaker OFF and unplug when finished.