Continental dl1f-se Техническое Руководство

• 17

3

/

4

" Width - 15 Cu. Ft. Capacity

• 36

1

/

4

" Width - 30 Cu. Ft. Capacity

• Modern, State-of-the-Art Styling

• Performance Rated Refrigeration System Utilizing

Environmentally Safe R-404A Refrigerant

• High Density Non-CFC Polyurethane Foamed-In-

Place Insulation

• Will Accommodate 12 x 20 Pans

• Chrome Plated Flow Line Handles

• Self-Closing Doors
• Automatic Interior Lighting

• Field Rehingeable Doors (model DL1FSE only)

• Automatic Hot Gas Condensate Evaporator

(model DL2FSE only)

• 6" Stainless Steel Legs

• External Digital Thermometer

• Automatic Electric Defrost

•Remote 
•Pass-Thru 

(2 Sec. Model Only)

•Shallow Depth 

(2 Sec. Model Only)

•Half Door

Standard (S/S Front, Aluminum Ends & Interior)
Suffix SA (S/S Exterior, Aluminum Interior)
Suffix SS (S/S Exterior & Interior)

(shown with optional 12 x 20 pans)

Refrigeration System

A “performance rated”, air cooled, hermetically
sealed, capillary-type refrigeration system is installed
on the top of each freezer. Plasticized fin coil and air
circulating fans are contained within a concealed
“plug” type insulated housing, readily accessible on
the top of the cabinet and separate from the food
zone to increase food storage capacity. The entire
“plug” system is fully charged with  refrigerant and
mounted on a sturdy steel, rail-type base which can
be easily removed if refrigerator conversion is
desired. Freezers are designed to maintain 0 degrees
Fahrenheit (-18 degrees Centigrade) while operating
with an unrestricted air supply in a maximum ambient
temperature of 100 degrees Fahrenheit. Automatic
electric defrost timer initiates defrost cycles at prede-
termined intervals. All condensate water is evaporat-
ed by an automatic non-electric, corrosion-resistant
condensate evaporator. A strict quality-assurance
team inspects all materials and components to certify
that each model conforms to the most exacting stan-
dards. All models are factory performance tested for a
minimum of 16 hours prior to crating. 

Cabinet Construction

All materials are of top quality, assembled to conform
with strict quality-assurance  requirements. The cabi-
net front is constructed of heavy-gauge polished
stainless steel for durability. All cabinet joints and
seams are sealed vapor-tight. Case is of all metal,
welded construction and internally supported and
braced for a rigid unit construction. Cabinet design
eliminates overlapping panels with raw edges.
Cabinet body is insulated with non-CFC, foamed-in-
place polyurethane foam with an average thickness of
3 inches to ensure increased energy efficiency. Full-
length louvered air grille located above the doors
allows equal air circulation to the condensing unit.
Easily removable, low wattage, anti-sweat door
heaters concealed by a non-metallic, non-conductive,
high impact thermal breaker strip eliminates conden-
sate build-up on the cabinet front. Fluorescent lighting
is activated by an easily accessible interior switch.
Cabinets are equipped with 6-inch adjustable stain-
less steel legs.

Shelving

Shelves are designed for heavy-duty use with .306"
diameter frame and brace members and .140" diam-
eter fill wires spaced 

3

/

4

" apart. Shelves are welded

steel and epoxy-coated for a durable, long, rust-free
service life. Adjustments are in 1/2 inch increments
and a wide door opening allows the use of a variety of
optional pan and tray slide types.

Door Construction

Triple-pane tempered glass is encased by a heat

ed

heavy-duty aluminum extruded frame.
Replaceable snap-in door gaskets are self-adjust-
ing, heavy-duty, magnetic type. Door handles and
hinges are chrome-plated and non-corrosive.
Doors are provided with built-in cylinder locks
which are keyed alike. Hinges are cam-action, lift-
off type featuring positive safety stop at 120
degrees.