Continental dl1fe-ss-gd Техническое Руководство

• Modern, State-of-the-Art Styling Performance rated 

“Plug” Refrigeration System Utilizing Environmentally 
Safe R-404a Refrigerant Designed for (0° F) Cabinet

• 3" Non-CFC Polyurethane Foam Insulation
• Cam-Action Lift-Off Hinges
• Self-Closing Doors
• Magnetic Snap-In Door Gaskets
•   Cabinet Upper Side Panels and Refrigeration “Plug”

System can be Easily Removed and Reinstalled at   
Job-Site Where Space Limitations are Confining

• Cylinder Lock in Each Door
• Automatic Hot Gas Condensate Evaporator
• Refrigeration System is Readily Accessible on Top 

of the Cabinet and Separate from the Food Zone
to Increase Food Storage Capacity

• Adjustable 6" Stainless Steel Legs
• Heavy-Duty, Epoxy-Coated Steel Shelves
• External Digital Thermometer
• Automatic Electric Defrost
• Triple-pane, Tempered Hinged Glass Doors
• Fluorescent Interior Lighting

Standard (S/S Front, Aluminum Ends & Interior)
Suffix SA (S/S Exterior, Aluminum Interior)
Suffix SS (S/S Exterior & Interior)

• Half Door
• Remote

• Pass-Thru
• Consult Factory

A “performance rated”, air cooled, hermetically
sealed, capillary-type refrigeration system is installed
on the top of each refrigerator. Plasticized fin coil and
air circulating fans are contained within a concealed
“plug” type insulated housing, readily accessible on
top of the cabinet and separate from the food zone to
increase food storage capacity. The entire “plug” sys-
tem is fully charged with refrigerant and mounted on
a sturdy steel, rail-type base which can be easily
removed if freezer conversion is desired. Freezers
are designed to maintain  0 degrees Fahrenheit (-18
Centigrade) while operating with an unrestricted air
supply in a maximum ambient temperature of 100
degrees Fahrenheit . All condensate water is evapo-
rated by an automatic non-electric, corrosion-resist-
ant condensate evaporator. A strict quality-assurance
team inspects all materials and components to certify
that each model conforms to the most exacting stan-
dards. All models are factory performance tested for a
minimum of 16 hours prior to crating. 

All materials are of top quality, assembled to conform
with strict quality-assurance requirements. The cabi-
net front is constructed of heavy-gauge polished
stainless steel for durability. All cabinet joints and
seams are sealed vapor-tight. Case is of all metal,
welded construction and internally supported and
braced for a rigid unit construction. Cabinet design
eliminates overlapping panels with raw edges.
Cabinet body is insulated with non-CFC, foamed-in-
place polyurethane foam with an average thickness of
3 inches to ensure increased energy efficiency. Full
length louvered air grille located above the doors
allows equal air circulation to the condensing unit.
Easily removable, low wattage, anti-sweat door
heaters concealed by a non-metallic, non-conductive,
high-impact thermal breaker strip eliminate conden-
sate build-up on the cabinet front. Fluorescent lighting
is activated by an easily accessible interior switch.
Cabinets are equipped with 6-inch adjustable stain-
less steel legs.

Shelves are designed for heavy-duty use with .306"
diameter frame and brace members and .140" diam-
eter fill wires spaced 

3

/

4

" apart. Shelves are welded

steel and epoxy-coated for a durable, long, rust-free
service life. Adjustments are in 1/2 inch increments
and a wide door opening allows the use of a variety of
optional pan and tray slide types.

Triple-pane tempered glass is encased by a heated,
heavy-duty aluminum extruded frame. Replaceable
snap-in door gaskets are self-adjusting, heavy-duty,
magnetic type. Door handles and hinges are chrome-
plated and non-corrosive. Doors are provided with
built-in cylinder locks which are keyed alike. Hinges
are cam-action, lift-off type featuring positive safety
stop at 120 degrees.