Baumatic btwm4 Benutzerhandbuch
7
Using your BTWM4
NOTE: (*VERY IMPORTANT*) – You must
ensure that the transportation bolts
have been removed before you attempt
to use your Washing Machine,
OTHERWISE you will damage or
destroy your appliance. See page 27
for instructions.
have been removed before you attempt
to use your Washing Machine,
OTHERWISE you will damage or
destroy your appliance. See page 27
for instructions.
Only once you are sure this has been done can you do
the following
:
1) Plug in your machine
2) Turn on the water supply
Note on using your
Washing Machine
Washing Machine
for the first time:
There may be water
left inside your
machine after factory
tests and trials.
left inside your
machine after factory
tests and trials.
•
The first time you run a
wash cycle, you should not
put laundry in your machine
as it may need to drain water.
put laundry in your machine
as it may need to drain water.
• Pour half a measuring cup of
normal or all purpose detergent
into compartment 2 (
into compartment 2 (
) in your
detergent dispenser and select
wash program 2 (without prewash)
for 90
wash program 2 (without prewash)
for 90
°
C.
• Start the programme.
• Wait until the programme finishes.
*
FOR NORMAL USE, SEE NEXT PAGE