Baumatic bf457 Benutzerhandbuch

Trace a problem using the table below instead of having to call for

help.

PROBLEM WHAT

CHECK THAT THE PLUG IS WELL-INSERTED INTO THE

POWER SOCKET

THAT THERE IS POWER FROM THE MAINS – THERE MAY BE

A BLACKOUT OR YOUR FUSES MAY HAVE BLOWN.

THAT THE ELECTRONIC THERMOSTAT (REGULATOR FOUND

ON THE INSIDE WALL OF THE FRIDGE-FREEZER NEAR THE

TOP) IS IN THE RECOMMENDED FUNCTIONING POSITION

AND NOT ‘0’ (OFF).

THAT THE SOCKET IS SUFFICIENT AND NO ADAPTER

OR EXTENSION LEADS HAVE BEEN USED.

YOUR FRIDGE-FREEZER DOES NOT
APPEAR TO BE WORKING / OPERATION
LAMPS ARE OFF WHEN THEY SHOULD BE
ON / FOOD HAS
DEFROSTED WITHOUT YOUR
KNOWLEDGE / NO APPARENT POWER

THAT THE POWER SUPPLY VOLTAGE CORRESPONDS

TO THE APPLIANCE.

YOU HAVE OVERLOADED THE APPLIANCE. TAKE OUT

AND CONSUME FOOD; LOOK FOR OUT-OF-DATE FOOD

THAT CAN BE DISPOSED OF.

THE THERMOSTAT SETTING IS SET TO ‘1’. SET IT

HIGHER.

ENSURE THAT THE DOOR HAS BEEN CLOSED PROPERLY.

FOR INSTANCE, THERE MAY BE A PROBLEM INSIDE THE

UNIT, KEEPING THE DOOR OPEN OR ANOTHER
FAULT, SUCH AS BROKEN OR MISSING

DOOR SEAL.
ENSURE THAT THERE IS NO DUST ON THE CONDENSER.

YOUR FRIDGE-FREEZER APPEARS TO BE
PERFORMING POORLY

ENSURE THAT THERE IS ENOUGH ROOM AT THE REAR AND

SIDES OF THE UNIT/

THERE IS A NOISE

THE COOLING GAS WHICH CIRCULATES MAY MAKE

A SLIGHT NOISE (BUBBLING SOUND) EVEN WHEN
THE COMPRESSOR IS NOT RUNNING. THIS IS

NORMAL. IF THESE SOUNDS CHANGE, ENSURE:

YOUR UNIT IS WELL LEVELLED /

NOTHING IS TOUCHING THE REAR OF THE UNIT /

NO MATERIAL ON THE APPLIANCE IS VIBRATING.

IMPORTANT

–

MAKE SURE THAT THERE IS ADEQUATE AIR FLOW

FOR YOUR FRIDGE-FREEZER. PARTICULAR AREAS TO WATCH
INCLUDE THE SPACE BETWEEN THE FEET. KEEPING THESE
AREAS WITH ADEQUATE AIR-CIRCULATION WILL PREVENT YOUR
FRIDGE FREEZER FROM EXPERIENCING PROBLEMS.

Troubleshooting