Baumatic bf360 Benutzerhandbuch

Seite von 22
 
 
 
4
 
ELECTRICAL SAFETY 
              
 
• 
NOTE - This appliance must be grounded.  In the event of a malfunction or breakdown, 
grounding will reduce the risk of electric shock by providing a path of least resistance of 
electrical current.  You will be able to tell if it is because a non-grounded appliance will give off 
an electrical discharge.    Manufacturer declines all responsibility for any damage due to non-
grounding of appliance. 
• 
DURING THE GUARANTEE PERIOD ONLY BAUMATIC SERVICE ENGINEERS OR AN AUTHORISED AGENT OF 
BAUMATIC SHOULD CARRY OUT REPAIRS ON THIS UNIT. 
• 
DO NOT USE IF THE SUPPLY CORD IS DAMAGED.  NEVER TAKE RISKS WITH FIRE! 
 
ƒ
 
ENSURE YOU CONNECT THIS APPLIANCE TO A SUPPLY RATED AT 220-240V (or 200-230V) and 50HZ. 
ƒ
 
NOTE: the supporting structure is constructed in panels of treated sheet steel, electrostatically 
enamelled to resist ill-treatment and to give long-lasting beauty and shine.  
 
:
 
Do not attempt to alter the specifications of 
this appliance.  Doing so could damage the 
machine, cause injury & invalidate your 
warranty. DO NOT USE ADAPTERS/SHUNTS. 
:
 
Do not allow children to play with, near or 
inside this Fridge-Freezer.  
:
 
Do not pull on the power supply cable to 
free the plug from the wall! 
:
 
Do not attempt to use your Fridge-Freezer 
outdoors or any place where it is likely to 
come into contact with the elements.  
:
 
Do not pull out or insert the plug with wet 
hands. 
:
 
Before any cleaning or maintenance work, 
ensure that the appliance has been 
disconnected from the power supply. 
 
 
 
 
:
 
Never allow the back coils of the Fridge-freezer 
to come into contact with any wall surface.  
ALWAYS ENSURE THAT THE SPACE INTO 
WHICH YOU ARE PLACING YOUR APPLIANCE IS 
FREE OF STORED ITEMS SUCH AS PAPERS OR 
OTHER FLAMMABLE MATERIALS. 
:
 
NEVER block the VENTILATION OPENINGS OF THE 
APPLIANCE EITHER INSIDE OR ON ITS EXTERIOR.  
IT IS VITAL TO KEEP YOUR FRIDGE-FREEZER WELL 
VENTILATED SO THAT THERE IS PROPER AIR FLOW 
BETWEEN THE BOTTOM OF THE UNIT AND THE 
PLINTH / KICK PLATE ON WHICH IT IS SITTING. 
:
 
WARNING – DO NOT DAMAGE THE REFRIGERANT 
CIRCUIT.  AT THE END OF THE FUNCTIONAL LIFE 
OF THE EQUIPMENT (WHICH USES COOLING GAS 
R600o [ISOBUTANE]) AND INFLAMMABLE GAS 
INSIDE THE INSULATING FOAM, IT MUST BE 
PLACED IN SAFETY BEFORE SENDING IT FOR 
PROPER WASTE DISPOSAL. 
 
PLEASE OBSERVE ALL INSTALLATION ADVICE IN THIS MANUAL FOR 
SAFE USAGE OF YOUR APPLIANCE. 
 
 
 Note
:  Before discarding an old refrigerator/freezer, switch off and disconnect it 
from the power supply.  Cut off and render any plug useless.  Ensure that the door 
cannot jam (removing it is best), regardless of whether or not it can be pushed open 
from inside. AN OLD FRIDGE/FREEZER CAN BE A DEADLY PLAYTHING FOR CHILDREN! 
CONFORMITY TO W.E.E.E. DIRECTIVE
 
 
 
Important Safety Information: 
Please Read this before installing & using.